Build a open frame rack server enclosure. Assemble a server rack cabinet

In this guide we are putting together the iStarUSA 4u open frame rack to house or Hp Proliant DL360 1u G8 rack server and Unifi switch.

Step 1. iStarUSA 4-post open frame rack 4u unboxing and review

In this video we are unboxing the iStarUSA 4-post open frame rack 4U from B&H Photo. I have pre built half of the frame offline. You will need m6 screws (with washers) to assemble the rack server parts.

Step 2. Assembly instructions for Server Rack Enclosure 4-post open frame rack.

In this video we are putting together the other half of the 4 post homelab server rack. Use M6 mat black screws and nuts to hold all your server components together.

Step 3. iStarUSA 4-post open frame rack. Assembly of the 4 crossbars

In this video we are connecting the left and right sides that were built in the previous videos. We are using the remaining 4 bars and m6 screws and nuts to complete the main construction of the server rack.

Step 4. iStarUSA 4-post open frame rack small 4u bar server rack enclosure installation

In this video we are adding the small 4u bars and looking at the casters. The 4u marks face out towards the back of the unit. If you are installing the casters I would assemble on the top then flip the whole unit over. This video ends the series on how to build the iStarUSA 4u open frame server rack. BE SURE TO TIGHTEN ALL YOUR SCREWS before moving on.